How to Replace Discs on a Ford Escape

The brake discs on a Ford Escape are just one component in the braking system, but one of the most important. Its the brake disc which turns with the wheel, and is also the object that is clamped onto by the brake pads to slow the vehicle. When you change the brake pads, you also want to change or turn the brake discs (also known as rotors) so that you can maximize the contact points. In this case, the project vehicle is a 2005 Ford Escape, but the process is similar for other vehicles as well.

Instructions

1

Use the jack to lift up the front of the vehicle, then set it on the jack stands. Be sure that the vehicle is completely and solidly on the stands prior to working on the vehicle. Take off the front wheels using the tire iron and set them out of the workspace.

2

Unbolt the brake caliper anchor plate from the front suspension using the ratchet, then lift the caliper and anchor plate off of the front suspension. Support the caliper on a spare jack stand or any other solid object, as long as it isnt hanging from the brake line, which could damage the line.

3

Use the wire cutters to remove the brake disc retaining clips located on the wheel lugs. These do not need to be reinstalled, so its OK if you cut them completely off of the disc and discard them. Slide the brake disc off of the hub.

4

Slide the replacement brake disc onto the hub. Then attach the brake caliper anchor plate to the front suspension using the 3/8-inch ratchet and socket.

5

Reinstall the wheels and tires using the tire iron, then lower the SUV off of the stands using the jack.

Related Posts by Categories